年费会员 5折优惠 - 限时抢购!

立即购买!
Logo
AI Stem Splitter

Split Any Song Into Six Stems

Upload a track and get vocals, drums, bass, guitar, piano and the remaining instruments as individual audio files. Built on the 6-stem Demucs model, ready for remixing, practice or sampling.

Preset: 6-stem Demucs with vocals, drums, bass, other, guitar and piano all selected, MP3 output.

What a stem splitter does

A stem is one layer of a finished song: the vocal, the drum kit, the bass. Producers have the stems of their own tracks, but the public almost never does. A stem splitter works backwards from the stereo file, estimating each layer with a neural network so you can pull a song apart after the fact.

This page runs the 6-stem Demucs model. Compared with the common 4-stem split it separates guitar and piano from the leftover instruments, which matters for rock, pop and singer-songwriter material where those two carry the harmony.

Where six stems beat four

With four stems, a track with a rhythm guitar and a piano gives you one crowded other stem. With six, you can mute the guitar and play it yourself, or isolate the piano to transcribe the chords. Bands use it to build custom practice tracks, and DJs use the drum and bass stems for transitions.

The trade-off is accuracy. Guitar and piano are harder for the model than vocals and drums, so expect a little bleed between them and the other stem. If you only care about a clean voice and rhythm section, the four-stem preset on the vocal remover page is a more conservative choice.

Working with the files afterwards

Download the stems as WAV if you will edit them, since each MP3 re-encode adds artefacts. Import everything into your DAW at the same start position and the stems will line up exactly, because all of them are rendered from the same timeline.

From there, common next steps are tempo and key detection on the isolated bass, converting a piano or guitar stem to MIDI, or sending the vocal stem to a mastering chain. Stems are raw material, so a gentle high-pass filter on the non-bass stems often cleans up low-frequency bleed.

Limits worth knowing

Six stems is the ceiling of this model: there are no separate stems for strings, synths or backing vocals, and everything the model cannot assign lands in other. Very busy mixes with several guitars or layered keyboards will blur between guitar, piano and other. Files are capped at 100 MB and 10 minutes, and the separation is deterministic enough that running the same song again gives a very similar result, so spend your credits on a better source file rather than on retries.

Stem splitter at a glance

Limits and cost for this page, read from the model configuration.

ModelDemucs HTDemucs 6-stem (HTDemucs 4-stem and others selectable)
StemsVocals, drums, bass, guitar, piano, other
InputMP3, WAV or M4A, one file, up to 100 MB and 10 minutes
OutputOne audio file per selected stem, MP3 or WAV
Cost50 credits per song, flat regardless of stems kept
Weakest stemPiano, followed by guitar; vocals, drums and bass are strongest

Who uses stem splitters

Practical jobs for separated tracks.

Band practice tracks

Mute the instrument you play and rehearse against the rest of the recording.

Remixing

Rebuild a song around its isolated vocal, drums or bass in your own arrangement.

Transcription

Listen to the piano or bass alone to write out chords and parts by ear.

Sampling and sound design

Pull a clean drum or bass loop from a track to use as a reference or sample source, where you hold the rights.

How to split a song into stems

One upload, six files.

  1. 01

    Upload your track

    Add an MP3, WAV or M4A up to 100 MB and 10 minutes. The page opens with the 6-stem model and every stem switched on.

    Lossless sources separate best

  2. 02

    Choose your stems

    Keep all six or switch off the ones you do not need. The price stays at 50 credits per song either way.

    Turn on WAV output if you will process the stems further

  3. 03

    Download each stem

    Preview the stems in the result panel and download the ones you want to drop into your DAW, sampler or practice app.

    Align stems at zero to rebuild the original mix

Stem splitter FAQ

Stems, quality and cost explained.

With the 6-stem model: vocals, drums, bass, guitar, piano and other. Other holds everything the model could not place in the first five, such as synths, strings, pads and effects.
They are usable but weaker than vocals, drums and bass. Demucs itself notes that the piano source is the least reliable, and guitar can pick up synth or organ parts. Treat them as a strong starting point, not studio-clean multitracks.
Yes. Open the model dropdown in the form and pick HTDemucs 4-Stem, or leave the 6-stem model on and switch off guitar and piano. Four-stem mode keeps guitar and piano inside the other stem.
50 credits per song. The price does not change with the number of stems you keep, so there is no saving from picking fewer.
Approximately. Played together at the same start point, the stems rebuild a close copy of the song, but neural separation is not lossless, so small differences are normal.
Yes, as a separate step. Download a stem such as bass or piano, then run it through the audio to MIDI tool to get notes you can edit. Single instrument stems convert far better than full mixes.

More from the same engine

Single-purpose pages that run the same separation model.

价格

选择适合您的计划。没有隐藏费用,没有意外。

入门版

开始您的音乐之旅

14.99USD / 1 月
600点
  • 200 首
  • 100 次
  • 2 个(并行任务数)
  • AI音乐生成器
  • AI歌词生成器
  • AI人声消除
显示更多 (+9)
  • AI音轨分离
  • AI母带处理
  • 音乐分析器
  • AI翻唱生成器
  • 1000 次(音乐下载)
  • 商业许可证
  • 混音与编辑
  • AI歌声模型训练
  • 邮件支持

爱好版

热门

释放您的创意潜能

29.99USD / 1 月
1500点
  • 500 首
  • 250 次
  • 5 个(并行任务数)
  • AI音乐生成器
  • AI歌词生成器
  • AI人声消除
显示更多 (+9)
  • AI音轨分离
  • AI母带处理
  • 音乐分析器
  • AI翻唱生成器
  • 无限(音乐下载)
  • 商业许可证
  • 混音与编辑
  • AI歌声模型训练
  • 邮件支持

专业版

专业级音乐制作工具

49.99USD / 1 月
3600点
  • 1200 首
  • 600 次
  • 10 个(并行任务数)
  • AI音乐生成器
  • AI歌词生成器
  • AI人声消除
显示更多 (+9)
  • AI音轨分离
  • AI母带处理
  • 音乐分析器
  • AI翻唱生成器
  • 无限(音乐下载)
  • 商业许可证
  • 混音与编辑
  • AI歌声模型训练
  • 邮件支持
  • 银行卡